Yes. You can use the Malone Anti-Rattle Hitch Lock System # MPG908 to help reduce/eliminate rattle between your receiver and ball mount when towing your travel trailer. With that said, my preferred solution for this is the Roadmaster Quiet Hitch # RM-061 because it's a little more sturdy. Roadmaster builds parts specifically for towing and they've got some of the highest quality parts on the market for this solution; just check out all of the 5 star reviews on the Quiet Hitch.
I've linked... view full answer...
The Torflex Lift Kit # K71-724-02 is designed to be used with #11 Dexter Torsion axles. To verify this is what you have under your 2020 Forest River R-Pod RP195 you can verify with the label on the axle tube or measure the bolt pattern for the axles. The bolts for the axle connection to the frame will be spaced 9" on center. This will give you a 2-7/8" lift for your R-Pod. If you have a different axle or measurement please let me know so I can confirm the correct kit for you. view full answer...
Your Jack-It 2 Bike Rack for A-Frame Trailers, # LC429756 fits around jacks and sets the bikes off-center of the jack behind it. See attached image. The Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers, # CC-255 mounts the tray above the propane tank/battery box location with a support arm that attaches to the A-frame just behind where the jack-it bike rack mounts. Using each simultaneously is possible if your R-Pod Travel Trailer has the needed clearance from the A-frame... view full answer...
Yes, your 2021 Forest River R-Pod 202 is absolutely compatible with the Ultra-Fab stabilizers, which are the following part:
- Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors # UF39-941705
This stabilizer has the proper width and more than enough capacity to work well with your travel trailer, and will give you a very easy way to level it out because of its independent motors. They operate independently, so even if you are on uneven ground you will be able to level and stabilize... view full answer...
The correct slide-topper does depend on the end-to-end measurement, and the 109 inches you got is the necessary info needed for the right fit. What you need for a 109 inch measurement is one of the following, depending on if you want White or Black:
- White: Solera RV Slide-Out Awning - 9'1" Wide - 48" Projection # LCV000163291
- Black: Solera RV Slide-Out Awning - 9'1" Wide - 48" Projection # LCV000168325 view full answer...
The Go Power Portable Solar System with Digital Solar Controller part # 34282730 comes with everything needed to plug into an R-Pod, there will be no separate cables or adapters needed if you have the pre-wired solar port. view full answer...
According to Lippert, the Solera Family Room for 10' RV Awning # LC362225 will only work on Solera, Dometic and Carefree awnings. Unfortunately, this will not fit your Thule awning. view full answer...
Yes, RV storage covers like the Classic Accessories PolyPro III Deluxe RV Cover for R-Pod Trailers # CA80-197-171001-00 do take into account for AC units and other accessories being on the roof. I was actually just looking at a similar cover from Classic Accessories that we used on the HYK trailer we have here and it was surprisingly thicker than I was expecting.
This specific cover is for trailers measuring 17' in length from the front of the rear bumper to the tip of the trailer tongue.... view full answer...
The specs I'm seeing for a 2018 Forest River R-Pod Hood River 176 Travel Trailer show it being 20' in length. If that is the case for your trailer then I recommend the Adco SFS AquaShed Cover for Travel Trailer - Up to 20' Long - Gray Item # 290-52240. If you look at the attached map you'll see this cover is rated for the climate you're living in in Oregon.
The top panel is constructed of triple-layer SFS AquaShed fabric which beads water on contact to prevent pooling, guards against... view full answer...
Yes the Go Power Overlander Solar Charging System with Digital Solar Controller # 34282181 would be a really great choice to charge the 12 volt battery of your 2020 Forest River RP195. Since your Forest River is pre-wired it would have wiring ran to the battery already. view full answer...
The bumpers mounted on the back of trailers typically have a very small capacity and are more for smaller accessories like a spare tire mount or grill so you're correct that you'll need to install an adjustable trailer hitch in order to haul your e-bikes.
The Adjustable Width Trailer Hitch Receiver for RVs # C13704 is going to mount on the bottom of your I-beams so you can easily line the brackets up so that the holes match up with your 3/4" lip, which will be enough to drill through... view full answer...
The Axle Riser Kit # LC382741 is the correct kit for your Lippert 201331 axle under your 2010 Forest River R-Pod 175. This will raise your trailer 3-1/2" so be sure to check your coupler and hitch height as you may need to adjust or change out your ball mount. view full answer...
Yes, the Medium QuickFit Tent # TH307056, that fits the Thule HideAway Awning # TH490011, has integrated doors on the left and right that allow you to get in and out of the tent without removing the tent or awning completely. This is essentially a standard type of tent that is held up by the awning. view full answer...
You could use bigger tires, but larger tires and wheels would mean less clearance to the trailer frame and fenders. For that reason I think axle risers are the better option.
The Torflex Lift Kit - Single Axle - 2-5/8" Lift # K71-707-01 would add 2 5/8" lift to your 2011 Forest River R-Pod Travel Trailer. You will need to check the sticker on the axle to ensure it is a Dexter Torsion axle. view full answer...
The Fan-Tastic Vent Cover FVU1500GR has been phased out so you would need to use the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover - 23" x 19.5" x 10.25" - Black # FVU1500BL in its place. If you don't already have the mounting brackets in place and will be using the ones included in the kit then I recommend also picking up some self-leveling sealant # 34427034145-1 for proper waterproofing.
If you'd prefer more light passing through into the trailer then I recommend going with the... view full answer...
The Classic Accessories Deluxe PolyPro III HD Cover for R Pod Trailer # CA80199 you linked to does come with a zippered entry door as well as a rear panel to offer you access to your trailer's doors. The price is just a reflection of the amount of material used. R-Pods are typically smaller and require less material than the standard travel trailer. You'll see the same for pop-up campers versus R-Pods. view full answer...
For your 2021 Forest River R-Pod RP-193 you'll want the Adco Olefin HD RV Cover # AD47ZR. This cover has zippered panels running down the passenger side of the trailer so that you can access your entry door and cargo compartments without having to remove the cover. The panels can be rolled up and strapped in place if you're needing to make multiple trips in and out of the trailer. view full answer...
Trailer hitches are not designed as custom fits for any RV like your 2017 R-Pod, but we can narrow down your choices. In order to choose which hitch is correct, you need to measure the frame of your trailer, which is going to let you know the exact hitch you need. So long as your R-Pod is a box frame, C-channel frame, or I-beam frame you will need one of the following two hitches, depending on the width of your frame:
- 18" to 51" Wide: Adjustable Width Trailer Hitch Receiver for RVs #... view full answer...
In order to determine a suitable SolidStep Manual Fold-Down RV Step for a Forest River R-Pod Travel Trailer you'll first need to measure the doorway width (inner most point to inner most point) followed by the threshold height (ground to floor of trailer where step mounts). The SolidStep Manual Fold-Down RV Steps part # LC713662 for example are designed for a doorway width up to 24" with a threshold height between 22" and 28".
I have attached our full list of step options below if this... view full answer...